background image

Explosion proof flameproof LED spot lightings Exd IICT6

Explosion proof flameproof LED spot lightings Exd IICT6

EFLD
Application
The explosion-proof LED sport lightings are normally designed for chemical and petrochemical plants, off-shore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present. The whole range has been designed to meet the main requirements of illumination of working areas.

enquiry now

Features & Specifications

●It is designed for use in hazardous locations (explosion group: IIC).
●Degree of protection IP66 provides reliable water resistance.
●The enclosure is manufactured of die-cast alumunium alloy, and the surface is polished by high-pressure static, stainless steel exposed fasteners
●Toughened glass, stand 4J impact;
●Silicone rubber seal;
●Light source is isolated from driver in a separated compartment, thus resulting in a longer service life, as the damaging heat from the lamp is not direct.
●High efficient energy-saving LED, with life service time over 50.000 hours
●Emergency type with duration up to 90 minutes is also available for ordering.
●It is suitable for ceiling mounting, wall mounting and pendant mounting.

Design
●The flameproof LED spot lighting consists of a yellow or grey powder-coated aluminum frame.
●Protective PC rear projection element is thermal resistant, extra strong, has high rear projection property, fixed in the holder of two aluminum rings. The high rear projection property holder is fixed to the holder by bolts.
●Inside the light fitting there is a reflector, power supply unit, LED light sources and terminal clamps. Inside and outside the light fitting there are earthing bolts.
●The fixing is made with the help of a rotating clamp, that allows installing the light fitting on any surface and at any angle.

Explosion proof flameproof LED spot lightings Exd IICT6
video
Explosion proof flameproof LED spot lighting Exd IICT6
Explosion protection marking Exd IICT6
Rated voltage AC187-265V, 50/60HZ
Lamp power LED 20W,30W,50W, 70W,100W,120W
Luminous efficiency >110lm/W
Power factor >0.95
Color temperature (CCT) Warm white: 2700-3500K

Nature white: 4700-5400K

Cool white: 5400-6500K

Please specify when ordering.

Ra >70
Dust and moisture protection degree IP65
Corrosion-resistant class WF2
Ambient temperature -40℃ to +40℃
Terminal 3×1.5~4mm2 (L+N+PE)
Cable entry G3/4”
Feeder cable diameter Φ10mm-Φ14mm
Installation Ceiling mount,pendant mount, wall mount

 

Contact Form