English
Chinese (Simplified)
Spanish
Russian
Dutch
French
German
Italian
Portuguese
Arabic
ELFL
Application
LED increased safety explosion-proof LED flood lights suitable for use in a wide range of industrial, chemical processing and other areas where flammable gases and vapours (explosive atmospheres) are present or where wet, dirty and tough environments, such as oil & gas refineries, petrochemical plants, drilling rigs, foundries, power plants, etc.
Increased safety explosion proof LED flood light for hazardous area lighting
Increased safety explosion proof LED flood light for hazardous area lighting
Features & Specifications
●Compact size and low weight
●Housing and lens: copper free aluminum
●Superior thermal heat sink design provides cool operation from -40℃ to +50℃
●High temperature silicone gaskets prevent water ingress and corrosion
●Replaceable LED drivers extend floodlight life even beyond 60 000 hours
●Possible to produce with a battery, guaranteeing the light fitting operation in case of absence of electric supply up to 90 minutes.
Design
●LED flood light consists of a powder-coated aluminum frame.
●Protective borosilicate glass rear projection element is thermal resistant, extra strong, has high rear projection property.
●Inside the flood light there is power unit, LED light sources, battery and terminal clamps.
●Inside and outside the flood light there are earthing bolts.
| Increased safety explosion proof LED flood light for hazardous area lighting
Exd IIBT4 |
|
| Explosion protection marking | Exd IIBT4 |
| Rated voltage | AC100-277V |
| Lamp power | LED 50-150W |
| Luminous efficiency | >110lm/W |
| Power factor | >0.98 |
| Color temperature (CCT) | Warm white: 2700-3500K
Nature white: 4700-5400K |
| Cool white: 5400-6500K
Please specify when ordering. |
|
| Emergency time | Emergency time |
| Dust and moisture protection degree | IP65 |
| Corrosion-resistant class | WF2 |
| Ambient temperature | -40℃ to +50℃ |
| Terminal | 3×1.5~4mm2 (L+N+PE) |
| Feeder cable diameter | Φ10mm-Φ14mm |
