The explosion-proof LED floodlights are normally designed for chemical and petrochemical plants, off-shore platforms, refineries and any other industry where hazardous atmospheres (gas and combustible dust) are potentially present. The whole range has been designed to meet the main requirements of illumination of working areas.
Explosion proof flameproof LED floodlight Exd IICT6
Features & Specifications
●It is designed for use in hazardous locations (explosion group: IIC).
●Degree of protection IP66 provides reliable water resistance.
●Robust aluminum alloy made enclosure and paint finish treatment ensure high degree of corrosion resistance, suitable for adverse environment applications.
●Light source is isolated from driver in a separated compartment, thus resulting in a longer service life, as the damaging heat from the lamp is not direct.
●Unique optical distributions offer higher than 85% of efficiency.
●Emergency type with duration up to 90 minutes is also available for ordering.
●It is suitable for seat mounting, wall mounting and pendant mounting.
●The flameproof LED floodlight consists of a yellow or grey powder-coated aluminum frame.
●Protective PC rear projection element is thermal resistant, extra strong, has high rear projection property, fixed in the holder of two aluminum rings. The high rear projection property holder is fixed to the holder by bolts.
●Inside the light fitting there is a reflector, power supply unit, LED light sources and terminal clamps. Inside and outside the light fitting there are earthing bolts.
●The fixing is made with the help of a rotating clamp, that allows installing the light fitting on any surface and at any angle.
|Explosion proof flameproof LED floodlight Exd IICT6|
|Explosion protection marking||Exd IICT6|
|Lamp power||LED 70W,80W,100W|
|Dust and moisture protection degree||IP65|
|Ambient temperature||-20℃ to +40℃|
|Feeder cable diameter||Φ10mm-Φ14mm|
|Installation||Pendant mount, wall mount|